Services / Fabrication
Fabrication
Designing, modifying and building components so they fit and function together. When the part you need does not exist, this is how it gets made.
What it is
Made to fit, then proven to work.
Fabrication work involves designing, modifying and building components so they properly fit and function together within a vehicle.
We specialize in modifying axle housings, brackets, differentials, driveshafts and other drivetrain components. The work can require precise measuring, cutting, grinding, welding, machining and component alignment.
Once it is done, the work is inspected for quality, alignment, clearance and proper fastening, then put through a functionality test to make sure it is reliable for what it was built to do.
| Quality | Inspected |
|---|---|
| Alignment | Inspected |
| Clearance | Inspected |
| Fastening | Inspected |
| Function | Tested for its intended use |
- What the part has to fit, and what it has to clear
- The components you already have on hand
- What the vehicle is being built to do
- Measurements or photos of the area being modified
Not sure about any of it? Ring the shop and we will walk you through it.
In the shop
Measured, cut, welded, aligned.
- Measuring
- Cutting
- Grinding
- Welding
- Machining
- Alignment
- Axle housings
- Brackets
- Differentials
- Driveshafts
- Other drivetrain components
- Larger axles
- Suspension lifts
- Different gear ratios
- Custom drivetrain configurations
Also in the shop
Send us your measurements. We’ll send back a number.
Driveshaft repair estimates are free. No obligation, no run-around.